Choose The Proper Binding Method For Your Catalogs

The design and content are not the only things that are important in catalog printing. Your print catalogs are not complete until the fat lady sings - or in this case, until the binding has been properly placed and done with.

Color print catalogs, for one, need to be bound based on the page count. There are also binding methods that are best for very short run catalog printing. And there are still those that can handle very thick documents especially those full color print catalog that are more than 112 pages. These need a very special binding method to carry that kind of special thickness.

In order for you to optimize the most appropriate binding method for your print job, you need to understand the methods available for your project. Whether you print catalogs online or the conventional way, using the most suitable binding method will help you a lot in providing your target clients with the best catalog printing possible.

Loose Leaf
This method often utilizes a series of print catalog sheets pulled together and then drilled with three holes. The holes are then held with a three-ring binder to gather all the sheets together. At times, the stitch can be found in the upper left hand corner in the sheets.

Pasting
Pasting your print catalogs means that sheets are held together with glue. The spine is where you put a small bead of glue to hold the sheets properly. The advantage of pasting your print catalogs is that it costs you less than the other binding methods, but still gives you that clean crisp appearance. The downside though – you can’t use it on thick documents. It can only be applied to 8 or 12-page catalogs.

Saddle Stitching
The most popular method, saddle stitching holds the sheets by 2 metal stitches or staples. It is very popular because similar to pasting, it is low cost. But unlike the first method, it is more durable and can lay relatively flat especially for print catalogs with low or medium page counts.

Spiral Binding
Like its name, this method uses a wire wound in a spiral fashion and then put through holes punched onto the catalogs. Spiral binding is more appropriate for thicker pages, hence, the cheapest for most thick catalogs. It also allows the document to lay flat when opened.

Perfect Binding
Commonly used for paperbacks, the inside pages are bound together with the cover by applying a liquid adhesive. It provides an impressive appearance, suits large page counts, and you can even print the company name and title on the spine. It does not however allow the document to lay flat when opened.

In addition to the ones mentioned, there are still more binding options available. Some points to remember when choosing the right method for your catalog printing: make sure that you consider your needs and budget. And narrow down the most suitable binding method based on your page count.

Article Source: http://www.wahm-articles.com

For comments and inquiries about the article visit: Print Catalogs

Print This Article Comment on Article Email to Friends Ezine Ready

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated